How do I perform a test with the Solar Utility Pro?

1. Connect the Solar Utility Pro securely to the PV module(s) or system, using the supplied test leads.


2. The Solar Utility Pro will automatically detect any DC voltage connected to the PV test socket inputs and display the measured voltage (Voc).


3. If the PV voltage polarity is reversed, the polarity indicator will flash a cross next to the voltage icon.


4. If the incoming voltage is greater than 30v then the shock hazard icon will flash.


5. Press the TEST button and the Solar Utility Pro will automatically measure the short circuit current (Isc).

Note: If the DC voltage polarity is incorrect or the voltage is greater than 5V or less than 1500V the Test key will be disabled until the problem is corrected.